Ground mounted solar structures 2V-1 (2 vertical – 1 pole)
The structure for ground-mounted photovoltaic panels 2V-1 (2 vertical – 1 pole) is a support system for solar panels consisting of two fixed vertical columns and a central pole that connects them. The photovoltaic panels are fixed to the horizontal crossbars that connect the two vertical columns, while the central pole provides additional support, ensuring greater stability. This structure is recommended for installation on steeply sloping terrain where other structures would be more difficult to install.
This type of structure is used to support photovoltaic panels of small, medium, and large sizes.
- Compatible with any model of photovoltaic panel.
- Provides a stable and durable support for solar panels.
- Suitable for installation on terrain with steep slopes where other structures may be difficult to install.
- Allows for adjustment of the panel tilt angle for maximum solar energy production.
- Can be installed in areas with strong winds due to its stable design.
- Expertly designed and tested for use in Romania.
Metallic structure with vertical placement of panels in a 2 x configuration with 1 pole in section
The structure is made of galvanized steel S235-S355 ZN 275.
This structural system is used in areas where the soil has sufficient consistency to fix a C 125/60/17/3.0 mm column capable of withstanding a reaction force of 1200-1500 kg
Installation possible in 6 days for a installed capacity of 400 kWp
The foundation method is through ramming or in special cases, concrete piers
Not recommended in areas with marshy or sandy soil, or with very high groundwater levels
The 2V-1 (2 vertical - 1 pole) solar panel ground structure is a support system for solar panels consisting of two fixed vertical columns and a central pole that connects them.
The photovoltaic panels are fixed to the horizontal crossbars that connect the two vertical columns, while the central pole provides additional support, ensuring greater stability. This structure is recommended for installation on sloping terrain, where other structures would be more difficult to install.
In addition, this structure allows for easier adjustment of the panel tilt angle, through special mechanisms for adjusting the angle of inclination. Thus, solar energy production can be optimized depending on the season and latitude of the location.
This structure is less recommended for installation in areas with strong winds, as the central pole may affect the performance of the structure under such conditions. In these situations, structures with two fixed vertical columns, without a central pole, may be more suitable.
The panels used in the photovoltaic structures are designed to carry the 6mm2 solar cables for direct current transport.
The structure of the photovoltaic panels is ingeniously designed with profiles that also serve as cable trays, ensuring the transportation of the 6mm2 DC solar cables. This intelligent design significantly reduces electrical installation costs by eliminating the need for an additional metallic cable tray.
